About me:

Name Jürgen Heidt
born at February 1966
born in Kehl am Rhein
  • I`m a trained mason and master of craft. 
  • I worked as a site manager in the field of shell construction and interior finishing for over 20 years and . took part in construction projects not only in Germany, but all over Europe and even North America (Canada).





Description of my activities/services in the following areas according to German and European standards

  • Road builder
    • Work autonomously either alone or in conjunction with others to execute works on the basis of technical documentation and work orders
    • Plan and coordinate work
    • Coordinate work with those involved in the construction works
    • Set up construction sites
    • Initiate measures to safeguard the work process and ensure safety, health and safety at work and environmental protection at the construction site
    • Check the quality of the work for any errors in execution, document works Carry out quality assurance measures
    • Invoice for services provided and conduct official handover of vacated job site
    • Use equipment and machinery Erect work, load bearing and protective scaffolding and calibrate plant components and construction machinery sub-assemblies
    • Carry out excavation works Line construction pits and trenches
    • Fill in and compress earth and build embankments
    • Carry out open drainage for surface water, soil-course water and groundwater
    • Build drainage for traffic areas
    • Construct foundations for floorings and coverings and fit load-bearing structures
    • Install prefabricated construction elements
    • Build paving and slab paving in synthetic and natural stone
    • Lay slab paving of different sizes
    • Check surfaces for damage and make maintenance preparations
    • Restore surface structures following excavation works
    • Carry out related tasks in building construction trades.


  • Concretor
    • Build frame, large-panel and special formwork for foundations, right-angle supports and beams, multiform elements and for flat-run and curved walls and ceilings
    • Erect, brace and anchor sub-assemblies, build formwork for visible concrete, conical forms, support pillars, landings and straight and spiral stair flights
    • Build and install reinforcing members and prepare reinforcement elements Install pre-stressed steel with anchor systems
    • Test fresh and hardened concrete
    • Deliver, feed and compress concrete and treat concrete and the surface manually and mechanically
    • Process concrete surfaces in accordance with design criteria
    • Underpin parts of buildings build, store, transport and install prefabricated reinforced concrete units
    • Seal concrete and reinforced concrete constructions against moisture
    • Build interior and exterior walls using various types of block and slab and a range of bonding techniques
    • Install materials to insulate against heat, cold, noise and fire
    • Check concrete surfaces for damage and carry out maintenance and refurbishment work on concrete and reinforced concrete structures
    • Carry out related works in the construction and civil engineering sectors,
    • Work autonomously either alone or in conjunction with others to execute works on the basis of technical documentation and work orders
    • Plan and coordinate work, coordinate work with those involved in the construction works Set up construction sites
    • Initiate measures to safeguard the work process and ensure safety, health and safety at work and environmental protection at the construction site
    • Check the quality of the work for any errors in execution, document work Carry out quality assurance measures
    • Invoice for services provided and conduct official handover of vacated job site Use equipment and machinery
    • Erect work, load bearing and protective scaffolding and calibrate plant components and construction machinery sub-assemblies.


  • Mason/Bricklayer
    • Build single-leaf and multiple-leaf walls using various types of block and slab and different bonding techniques, build masonry structures with piers and projections and natural stone masonry structures
    • Cover openings in masonry using artificial and natural blocks and pre-fabricated elements
    • Build walls and lintels using formwork bricks
    • Seal structures made of blocks against moisture and water pressure
    • Build, erect, brace and anchor formwork for foundations, right-angle supports and beams, and flat-run walls and ceilings
    • Build formwork for landings, straight stair flights and visible concrete
    • Make and install reinforcement members
    • Deliver, feed and compress concrete and treat the surface manually and mechanically
    • Install materials to insulate against heat, cold, noise and fire
    • Build composite heat insulation systems, prepare plaster and create plastered surfaces, prepare screeds and construction elements using dry construction techniques
    • Determine damage in connection with maintenance and renovation work, determine the causes and carry out maintenance and renovation work
    • Use equipment and machinery
    • Erect work, load bearing and protective scaffolding and calibrate plant components and construction machinery sub-assemblies
    • Carry out related works in the construction and civil engineering sectors
    • Work autonomously either alone or in conjunction with others to execute works on the basis of technical documentation and work orders
    • Plan and coordinate work, coordinate work with those involved in the construction works, set up construction sites
    • Initiate measures to safeguard the work process and ensure safety, health and safety at work and environmental protection at the construction site
    • Check the quality of the work for any errors in execution, document works
    • Carry out quality assurance measures, charge for services provided and conduct official handover of vacated job site


  • Dry construction builder
    • Work autonomously either alone or in conjunction with others to execute works on the basis of technical documentation and work orders
    • Plan and coordinate work and coordinate work with those involved in the construction works
    • Set up construction sites and initiate measures to safeguard the work process and ensure safety,health and safety at work and environmental protection at the construction site
    • Erect and dismantle working and protective scaffolding
    • Measure constructions and elements to ensure proper fit
    • Prepare elevations and setting drawings
    • Prepare surfaces
    • Clad wall surfaces with dry plaster linings
    • Erect stud walls made of plasterboard sections
    • Fit sub-constructions for wall and ceiling constructions
    • Clad wall and ceiling surfaces
    • Fill joints on boards of various materials and create connections to other construction elements
    • Build prefabricated walls made of various materials and from different systems
    • Build and fit counter ceilings and ceiling coverings using panellings and apron flashings in different materials and from different systems
    • Assemble and fit prefabricated constructions and elements
    • Build dry constructions to special technical and design specifications
    • Install materials to insulate against heat, cold, noise and fire
    • Install air-tight layers and vapour barriers
    • Seal dry construction structures against moisture
    • Determine damage in connection with maintenance and renovation work, determine the causes and carry out maintenance and renovation work
    • Use equipment and machinery
    • Check quality of the work for any errors in execution
    • Carry out quality assurance measures
    • Document work and invoice for services provided
    • Conduct official handover of vacated job site
    • Carry out related works in the construction and finishing sectors


  • Painter and varnisher - specialising in design and maintenance
    • Work autonomously and in a customer oriented way to execute works on the basis of work orders,carry out planning and design works either alone or as part of a team and coordinate work with other trades
    • Plan work, set up workplaces
    • Stipulate stages of work steps and materials and components required and initiate safety, health and safety at work and environmental protection measures at the workplace
    • Conduct discussions with customers
    • Check the quality of the work for any errors in execution, document works
    • Carry out quality assurance measures and hand over work to customer
    • Record materials and time used and invoice for services provided
    • Check and evaluate underlying surfaces and prepare such surfaces for coating
    • Carry out protective measures for surfaces and objects not to be treated
    • Treat, cover, coat and design surfaces
    • Maintain and repair surfaces
    • Carry out finishing and installation works, carry out plastering, insulation and dry wall works
    • Conduct measurements and document results
    • Select, set up, operate and maintain implements, tools, machines and equipment for the job at hand
    • Erect and dismantle temporary scaffolding
    • Operate vertical lift working platforms, set up and maintain hoists and conveyors
    • Process materials and components
    • Apply ceiling, wall and floor coverings
    • Draw up and implement plans for room and facade design
    • Carry out energy efficiency measures
    • Carry out wood and building protection measures


  • Tile and mosaic layer
    • Lay tiles, mosaics, natural stone and hewn stone using the thin-bed and thick-bed laying methods
    • Select tiles, mosaics, natural stone and hewn stone taking account of design considerations for the surface to be covered
    • Prepare base surfaces using a range of techniques
    • Prepare plaster and screed
    • Make claddings and coverings for composite, vertical, horizontal and sloping surfaces
    • Clad structural elements, in particular pillars, stairs and arches
    • Build and fit casings and facings
    • Fit prefabricated elements, in particular sanitation system units, weight-carrying constructions and prefabricated walls
    • Seal joints in claddings and coverings comprising tiles or mosaics
    • Install materials to insulate against heat, cold and noise
    • Remove efflorescence, check claddings and coverings for damage, restore and repair claddings and coverings
    • Carry out related tasks in the field of building construction
    • Work autonomously either alone or in conjunction with others to execute works on the basis of technical documentation and work orders
    • Plan and coordinate work, coordinate work with those involved in the construction works, set up construction sites
    • Initiate measures to safeguard the work process and ensure safety, health and safety at work and environmental protection at the construction site
    • Check the quality of the work for any errors in execution, document works
    • Carry out quality assurance measures
    • Invoice for services provided and conduct official handover of vacated job site
    • Use equipment and machinery
    • Erect work scaffolding and calibrate plant components and construction sub-assemblies.


  • Floor layer
    • Lay ready manufactured parquet flooring and laminated materials
    • Check floor conditions prior to laying
    • Prepare undersurfaces for the laying of textile and flexible floor coverings, ready manufactured parquet flooring and laminated materials
    • Create undersurfaces
    • Design and lay textile and flexible floor coverings
    • Treat the surfaces of cork flooring and other floor coverings
    • Make, process and install profiles
    • Maintain and carry out routine repairs to textile and flexible floor coverings, ready manufactured parquet flooring and laminated materials
    • Check the quality of work for any errors in execution and document work
    • Carry out quality assurance measures and charge for services provided
    • Operate and maintain equipment and machines
    • Conduct measurements and document results
    • Select and set up equipment and machines and carry out maintenance work
    • Process wood, wood materials, plastics and metals manually and by machine
    • Work autonomously and in a customer oriented way either alone or in conjunction with other trades to execute works on the basis of technical documentation and work orders
    • Plan and coordinate work
    • Set up workplaces and initiate safety, health and safety at work and environmental protection measures


  • Interior decorator
    • Design rooms in accordance with customer wishes
    • Design and cover wall, ceiling and floor surfaces
    • Design and lay a range of floor coverings
    • Advise customers on design
    • Work and process materials and ancillary materials
    • Check construction conditions on site, prepare sub-surfaces
    • Act autonomously in determining stages of work, materials and working methods
    • Prepare work documentation
    • Carry out measurements, apply quality assurance measures
    • Evaluate and document work results
    • Calculate costs of service provided
    • Set up workplaces
    • Initiate health and safety at work and environmental protection measures
    • Use and maintain tools, equipment and machines


References

Contact

Jürgen Heidt
Straße der Jugend 45
03050 Cottbus
Germany

Tel: +49 (0) 355 5 29 64-99
Mobil: +49 (0) 170 1 42 31 24
Fax +49 (0) 355 5 29 64-98

Contact